Download CAD data 9973 (101.4k bytes) for Century by Sanymetal

Sanymetal offers design opportunity . . . a method to specify and order the type, materials, color and combinations to meet your criteria for strength, corrosion resistance, in-place costs and design.

Specify the design type (Section 1), select the material for doors, panels and pilasters from Section 2, 3 and 4. For example: Sanyplastic panels can be installed with steel pilasters, stainless steel panels with baked enamel pilasters, or normal homogeneous materials can be used depending upon preference.

Possible combinations are virtually unlimited for top performance, durability, lowest maintenance and proven Sanymetal value. Complete specifications available on request.

BAKED ENAMEL

1. TYPE
Century toilet compartments shall be Acrylic Coated Century type as manufactured by Sanymetal.

2. DOORS
Shall be 1" thick with two sheets of #22 Galvanized-Bonderized steel enclosing sound-deadening Bridgecore. All formed edges shall be welded every 18" and sealed with a surrounding oval-crown lock strip, mitered, welded and finished at the corners.

Standard door size, other than "handicapped," is 24".

3. PANELS
Century, shall be 1" thick with two sheets of #22 Galvanized-Bonderized steel enclosing sound-deadening Bridgecore. All formed edges shall be welded every 18" and sealed with a surrounding oval-crown lock strip, mitered, welded and finished at the corners.

4. PILASTERS
Century pilasters shall be 1-1/4" thick with two sheets of #18 gauge, Galvanized-Bonderized steel welded and finished as specified for baked enamel doors. Pilaster to be secured with 3/8" bolts to overhead member (by others) in accordance with details shown. Not recommended for ceiling heights exceeding 9'0".

5. HARDWARE
a. Top hinge pin shall be secured at three points with all doors hinge fittings fully flush with face plates of the door.

b. Each door shall be equipped with chrome-plated cast alloy coat hook and bumper, Sanymetal concealed latch #8800 with bolt of stainless steel permitting exterior access, a one piece chrome-plated stop and keeper and #7961 concealed controlled power bearing gravity hinge.

c. The door shall be adjustable to permit rest position at any angle within a 270° arc and the weight at all times shall be carried by a power bearing with all moving parts concealed within the door thickness.

d. Pilaster hinge brackets shall be chrome-plated zamac alloy and thru-bolted to the pilaster.

e. Floor and ceiling connections shall be concealed with a one piece 304 stainless steel theftproof plinth.

f. Chrome-plated zamac stirrup brackets shall be used to attach panels and pilasters.

6. FINISH
Finish shall consist of base metal coating and a finish color coat of thermo-setting acrylic enamel applied electrostatically in a pressurized, dust free atmosphere, baked on to produce a uniform, smooth lustrous protective finish.

7. COLOR
Colors shall be . . . (Sanymetal number and color name). (Any two colors for contrasting pilaster/panels and doors may be specified.)

8. CERTIFICATION
A certificate of compliance shall be attesting that all materials are in accordance with Sanymetal’s preceding specifications.

STAINLESS STEEL

1. TYPE
Century toilet compartments shall be stainless steel Century type as manufactured by Sanymetal.

2. DOORS
Shall be 1" thick with two sheets of #22 gauge, 304 18-8 stainless steel enclosing sound-deadening Bridgecore. All formed edges shall be welded every 18" and sealed with a surrounding oval-crown lock strip, mitered, welded and finished at the corners.

Standard door size, other than "handicapped," is 24".

3. PANELS
Century shall be 1" thick with two sheets of #22 gauge, 304 18-8 stainless steel enclosing sound-deadening Bridgecore. All formed edges shall be welded every 18" and sealed with a surrounding oval-crown lock strip, mitered, welded and finished at the corners.

4. PILASTERS
Century pilasters shall be 1-1/4" thick with two sheets of #18 gauge, stainless steel welded and finished as specified for Stainless doors. Pilaster to be secured with 3/8" bolts to overhead member (by others) in accordance with details shown.

5. HARDWARE
a. Top hinge pin shall be secured at three points with all chrome-plated doors hinge fittings fully flush with face plates of the door.

b. Each door shall be equipped with chrome-plated cast alloy coat hook and bumper, Sanymetal concealed latch #8800 with bolt of stainless steel permitting exterior access, a one piece chrome-plated stop and keeper and #7961 concealed controlled power bearing gravity hinge.

c. The door shall be adjustable to permit rest position at any angle within a 270° arc and the weight at all times shall be carried by a power bearing with all moving parts concealed within the door thickness.

d. Pilaster hinge brackets shall be chrome-plated zamac alloy and thru-bolted to the pilaster.

e. Floor and ceiling connections shall be concealed with a one piece 304 stainless steel theftproof plinth.

f. Chrome-plated zamac stirrup brackets shall be used to attach panels and pilasters.

6. FINISH
All stainless steel units shall be #4 finish and shall be paper covered for protection during shipment and installation.

7. COLOR
Color shall be 304 stainless steel, #4 finish.

8. CERTIFICATION
A certificate of compliance shall be attesting that all materials are in accordance with Sanymetal’s preceding specifications.

SANYPLASTIC

1. TYPE
Century toilet compartments shall be Plastic Laminate Century type as manufactured by Sanymetal.

2. DOORS
Shall be constructed of Industry Standard plastic laminate NEMA approved, laminated under heat and pressure to a solid 45 lb. density flakeboard core. Finished Doors shall be 1" thick.

Standard door size, other than "handicapped," is 24".

3. PANELS
Shall be 3/4" thick and of the same construction, finish and performance standards as for Sanyplastic doors (section 2 above).

4. PILASTERS
Academy pilasters shall be 1-1/4" thick of same construction, finish and performance as for Sanyplastic doors. Pilasters shall be secured to floor by means of a 1/4" thick anchor bar mechanism and shall be secured and leveled by using 3/8" bolts and nuts-tension/compression mounted. Pilasters shall be braced with extruded, anodized aluminum anti-grip headrail and wall return.

Century Pilasters shall be 1-1/4" thick of the same construction, finish and performance as for Sanyplastic doors. Pilaster shall b e secured to overhead support member (furnished by others), by means of 1/4" thick anchor bar mechanism, and shall be secured and leveled by using 3/8" bolts and nuts-tension/compression mounted. Steel core pilasters recommended for ceiling heights exceeding 8'6".

Normandie pilaster shall be 1-1/4" thick of same construction, finish and performance as for Sanyplastic doors. Pilasters shall be secured to floor by means of 1/4" thick anchor bar mechanism and shall be secured and leveled by using 3/8" bolts and nuts-tension/compression mounted.

5. HARDWARE
Doors: Shall be equipped with Sanymetal #6101 top hinge recessed into door 2" from top with pin supported in door above and below top hinge bracket. Lower hinge shall be Sanymetal #6100 controlled power bearing consisting of Zytel cams under spring tension. Door width shall be carried by power bearing only, not on the cams. Door cycling shall be on a level plane and shall be operable and adjustable to any angle within a 270° arc.

Brackets: For panels and pilasters shall be chrome-plated zamac.

Operation: A power bearing shall carry the door weight. All moving parts shall be concealed within the 1" door thickness.

Accessories: Attachment and Construction. Hinge brackets shall be non-ferrous chrome-plated stirrup type attached to the pilaster by means of through bolts. Top hinge bracket shall be Sanymetal #7361, bottom hinge bracket to be Sanymetal #7360.

Door keeper and stop shall be Sanymetal, chrome-plated No. 2501 keeper and No. 2500 stop with rubber bumper locked into place. Door latch shall be Sanymetal No. 7431 non-ferrous, chrome-plated slide latch. Pilaster base shall be 3" high, No. 304 stainless steel, polished finish to conceal floor (or ceiling) connections.

6. FINISH
All units shall be made of Sanyplastic plastic laminate. All wood grain panels larger than 57-1/4" will have horizontal grain, unless vertical splicing is required.

7. COLOR
Color shall be from current Sanyplastic color section. Any two colors may be combined.

8. CERTIFICATION
A certificate of compliance shall be arresting that all materials are in accordance with Sanymetal’s preceding specifications.

Use of this product in showers or areas subject to hose-down maintenance is not recommended. Sanymetal recommends rust-proof Phenolic, or Stainless Steel for these environments.

SANYPHENOLIC

1. TYPE
Century not recommended

SANYPOLY

1. TYPE
Century not recommended

Note: Sanymetal reserves the right to improve, modify, or change its material and specifications at any time in such a manner as it may consider necessary or advisable, and to discontinue the manufacture and sales of any product without notice.

Sanymetal®
A CRANE PLUMBING COMPANY
2780 South Hwy. 1247
Somerset, KY 42501
Phone: (606) 678-2700
Fax: (800) 832-7994
Email: sanymetal@craneplumbing.com

 

---